 |
|
 |
 Pressure relief discharge line should be sloped downward, hints from a home inspectorPressure relief discharge line should be sloped downward the entire length (not trapped) to prevent a condition which may damage the valve mechanism. These valves can be periodically tested by lifting the lever handle on the top of the valve. If water does not discharge, it should be replaced. Inspection limitation: the relief valve is not tested during a visual inspection. When opened the valve will often stick. You may desire to test the valve during the final walkthrough. If so, be sure the outlet of the valve is not directed at yourself or others. Any problems with this very important valve should be corrected immediately. Contact a plumbing contractor for further assistance. Oil fired water heater in garage Drip pan over flow pans solar water heaters are generally passive or active systems . Domestic coil in boiler Tankless water heater Multiple water heating units Expect water heaters to last Water heater timer electric water heater timers Circulating hot water pump
Home Inspection Checklist -
New Home Inspection Checklist -
Home inspector training -
lung cancer asbestos -
How to become a home inspector -
Home Inspection Business - Mortgage loan rates - mortgage rate, second mortgage, refinance home rate information -
SiteMap -
list
SarasotaFloridaRealEstate.html
|
