 |
|
 |
 Pressure relief valve discharge, hints from a home inspectorPressure relief valve discharge not terminated outside or within 6" to 12" of ground or floor trapped: the "TP" valve is a safety device which is both pressure and temperature sensitive. If the temperature or pressure builds up too high, the relief valve will discharge water to relieve the problem. The water being discharged may be extremely hot, and for this reason, the relief discharge pipe should be directed outside the building, down towards the ground, and approximately 6 to 12 inches above the ground. Do not terminate the relief valve discharge under the building. In the event the TP valve discharged one would not be alerted, while the discharged water may subsequently damage the foundation, etc. Oil fired water heater in garage Drip pan over flow pans solar water heaters are generally passive or active systems . Domestic coil in boiler Tankless water heater Multiple water heating units Expect water heaters to last Water heater timer electric water heater timers Circulating hot water pump
Home Inspection Checklist -
New Home Inspection Checklist -
Home inspector training -
lung cancer asbestos -
How to become a home inspector -
Home Inspection Business - Mortgage loan rates - mortgage rate, second mortgage, refinance home rate information -
SiteMap -
list
SarasotaFloridaRealEstate.html
|
