 |
|
 |
 Gas valve to any appliance not installed, hints from a home inspectorGas valve to any appliance not installed : there is always the possibility that leaks may occur in the gas line supplying appliances. A gas shut-off valve in the appliance supply line can be very helpful in these situations. You could shut off the main valve but this would turn every pilot light and appliance in the building off. Appliances which are supplied with a flexible tube must be provided with a simple cap on this gas valve may prevent an accidental fire. A valve and the valve should immediately precede the flexible tube. A valve can be installed by property owners who have some plumbing experience. Everything needed for this task is available at building supply outlets. Contact a plumbing contractor if you feel you are not qualified for this task. Water main shut-off regulator leaking missing handle Faucet valve damaged spout loose handle missing Fixture faucet or valve plumbed in reverse hot on cold side Faucet valve leaks around handle spout connector pipes Sewer drain line damaged leaks improper Trap drain vent cap plug damaged leaking missing sewer clean-out may be buried slightly below the surface of the ground. new sewer clean-out on an older building may be an indicator of past or present sewer problems. Sump
Home Inspection Checklist -
New Home Inspection Checklist -
Home inspector training -
lung cancer asbestos -
How to become a home inspector -
Home Inspection Business - Mortgage loan rates - mortgage rate, second mortgage, refinance home rate information -
SiteMap -
list
SarasotaFloridaRealEstate.html
|
